Skip Navigation to main content U.S. Department of Energy Energy Efficiency and Renewable Energy
Federal Energy Management Program
 
About the ProgramProgram AreasLaws and RegulationsInformation ResourcesFinancing MechanismsTechnologiesServicesHome

Energy Incentive Programs, New York

Updated November 2009

Below you will find questions and answers regarding New York's utility energy efficiency programs, including options for load management, demand response, and distributed energy resources, and information about state-sponsored energy efficiency programs.

What public-purpose-funded energy efficiency programs are available in my state?

Between its public-purpose-funded programs (including those directed at residential and low-income customers) and programs offered directly by utilities, New York spent more than $314 million in 2008 to promote increased energy efficiency in the state. This sum is expected to grow considerably over the next few years.

In 1998, as part of its restructuring, the New York State Public Service Commission (PSC) designated the New York State Energy Research and Development Authority (NYSERDA) as the administrator of funding for energy efficiency and load management programs. These programs, collectively known as the New York Energy $mart Programs, are paid for through a Systems Benefit Charge (SBC) on the electricity transmitted and distributed by six of the state's investor-owned utilities. In 2005, the PSC extended these programs through 2011 at an annual funding level of $175 million.

Customers of Consolidated Edison (Con Edison), Orange and Rockland Utilities, National Grid (formerly Niagara Mohawk), New York State Electric and Gas, Central Hudson Gas and Electric, and Rochester Gas and Electric are eligible for NYSERDA programs. Customers of Long Island Power Authority and New York Power Authority should refer to the section below on utility energy efficiency programs.

There are a number of NYSERDA commercial and industrial programs that may be of interest to Federal customers. Several of these are profiled below.

  • The Existing Facilities Program provides both pre-qualified and performance-based incentives. Pre-qualified incentives are tailored for smaller projects. Applicants can receive per-unit incentives of up to $30,000 per project for a variety of pre-qualified energy efficiency and conservation measures, include lighting, HVAC, motors, and interval meters. Performance-based incentives are available for more involved projects that produce verifiable electricity or gas savings, or improve efficiency of industrial processes. These incentives are offered as payments for one year's worth of verifiable gas and electricity savings. Gas savings are incentivized at $4/therm (up to $25,000 or 50% of cost) for National Grid customers and $2/therm (up to $500,000 or 75% of cost) for Con Edison customers. Electric efficiency savings are compensated at $0.12/kWh upstate and $0.16/kWh in Con Edison territory. Energy storage is remunerated at $300/kW upstate and $600/kW for Con Edison customers. Performance-based incentives are also available for combined heat and power equipment to offset a portion of the technology cost of participating in demand response programs.

  • The New Construction Program provides:
    • Technical assistance in incorporating energy efficiency in building designs and evaluating potential efficiency opportunities.
    • Funding for the incremental cost difference between traditional and efficient equipment.
    • Assistance for commissioning, peak load management, advanced solar, daylighting, and other green building technologies.

    Applicants may choose among custom measures, whole building incentives, or a "Green Building Option." Certain cooling measures are also eligible for rebates. Specialized financial incentives are offered for customers in the Con Edison territory and upstate New York.

  • Through the Flexible Technical Assistance (FlexTech) program, financial support is offered on a cost-shared basis for feasibility studies, technical analysis of specific projects, rate analysis, aggregation studies, retro-commissioning, and other types of engineering analyses performed by a prequalified consultant. Customers with electricity bills of less than $75,000 per year may be eligible for low-cost energy audits through the Energy Audit Program.

  • The Technical Assistance Program is similar to FlexTech, but allows customers to work with a non-prequalified consultant. Through this program, NYSERDA offers energy feasibility studies, rate analysis and aggregation studies, retrocommissioning, and long-term energy management, and will cost-share up to $1,000,000 in the Con Edison territory and $500,000 elsewhere.

  • The New York Energy $mart Loan Program provides very low interest loans of up to $1 million for as long as 10 years to new construction and major renovation projects aimed at improving energy efficiency and/or incorporating renewable energy. Currently, the $mart Loan Program is closed to commercial customers but check the Web site for announcements.

What utility energy efficiency programs are available to me?

Long Island Power Authority (LIPA) offers the Commercial Construction Program, which provides financial incentives for installing energy-efficient equipment in new construction or renovation projects as well as technical assistance to help incorporate energy efficiency into the building design. The program has three basic options:

  • The prescriptive approach (with pre-determined incentives payments for lighting, HVAC, and other equipment).

  • The custom approach (for technical assistance and projects not covered under the prescriptive approach).

  • The comprehensive whole building approach (for more comprehensive, integrated energy efficiency solutions in large buildings).

The appropriate option will depend on the scope of the project and the types of energy-efficient technologies installed. LIPA also offers incentives for building commissioning and the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED®) certification as part of this program.

The New York Power Authority Energy Services Programs (ESP) connects technical experts with facility managers of public sector buildings to identify and design energy-saving projects financed by NYPA and paid off from customer electric bills.

Through the Small Business Direct Installation Program, Con Edison customers with monthly electric demand less than 100 kW are eligible for a free energy audit, installation of efficiency measures, and rebates up to 70%.

What load management/demand response options are available to me?

The New York Independent System Operator (NYISO) offers two demand response programs and two programs that allow demand to participate in the day-ahead market for electricity:

  • The Emergency Demand Response Program (EDRP) provides financial incentives for electricity users to voluntarily reduce consumption and/or operate on-site generation during periods of electricity reserve shortage in New York. NYISO provides two-hour notice of curtailment events as well as day-ahead advisories. Participants receive the higher of $500/MWh or the real-time zonal location-based marginal price (LBMP) for their curtailments. Participation in any curtailment event is voluntary and there are no penalties for non-performance. Individual customers can either participate directly (if their load reduction is at least 100 kW) or through an authorized curtailment service provider, such as a utility, energy service company (ESCO), or curtailment customer aggregator. Customers cannot participate in both the EDRP and the ICAP/SCR program (see below). EDRP and ICAP/SCR are dispatched separately by NYISO with ICAP/SCR resources dispatched first and EDRP customers called only if additional resources are needed.

  • The Special Case Resources (SCR) ICAP program provides financial incentives for electricity consumers larger than 100 kW to reduce electricity use or operate on-site generation during periods of electricity reserve shortage. NYISO provides two-hour notice of curtailment events as well as day-ahead advisories. Participants receive two separate payment streams; a capacity payment based on their committed load reduction amount and energy payments for their actual load reductions during curtailment events. Participants face non-compliance penalties if they do not curtail their committed amount when called by NYISO. Individual customers must participate through an authorized responsible interface party (RIP) who coordinates transactions with NYISO and cannot commit the same resources in both the EDRP and ICAP/SCR program.

  • The Day-Ahead Demand Response Program (DADRP) provides electricity users with the opportunity to bid load reductions into New York's day-ahead wholesale electricity market where their bids compete with generator offers to meet the state's electricity demand. At their discretion, customers can submit load reduction bids on a day-ahead basis by indicating the load reduction amount, price (between $50 and $1,000 per MWh), and time period. If the customer's bid is accepted and the customer fully curtails, they receive payment for their accepted bid based on the greater of the bid price or the day-ahead LBMP. If the customer fails to fully curtail, they pay the higher of the day-ahead price or the real-time price for the amount of incomplete scheduled load reduction. Individual customers can either participate directly in DADRP if their load reduction is at least 1 MW, or through an authorized curtailment service provider, such as a utility, ESCO, or a curtailment customer aggregator. Most of these providers require a customer to be able to reduce load by at least 100 kW each hour. Unlike the EDRP and ICAP programs, standby generators are not eligible for participation. Day-ahead participants can also be registered in EDRP.

  • NYISO also offers a Demand-Side Ancillary Services Program (DSASP) through which loads can provide 10-minute and 30-minute non-spinning operating reserves. To participate, registered demand-side resources submit availability bids to the day-ahead market. If these bids are accepted, the demand-side customer is paid the market clearing price for that level of reserves (e.g., 10-minute or 30-minute). In return, the customer must comply with load reduction signals from the NYISO. If the resource is asked to actually reduce demand in real-time, it will also be paid the real-time price of energy. If the customer changes its operating reserve offer in real-time, the difference between this and the day-ahead reserve amount is financially settled at the real-time operating reserve price. A demand-side resource cannot offer the same capacity in the DADRP and DSASP in the same day.

NYSERDA's Demand Response Performance Based Incentive offers incentives for equipment necessary to participate in demand response programs, such as load-shedding controls and automation equipment. This program supports building of new on-site generation that meets New Source Performance Standards within Con Edison's territory. Incentives are $200/kW in Con Edison territory and $100/kW elsewhere and cannot exceed 75% of total project cost. Participants who receive incentives for measures that help them participate in demand response programs must enroll for at least two summers in either the NYISO's Special Case Resources ICAP program or the DSASP (see above).

In addition to the NYISO and NYSERDA initiatives described above, Con Edison customers can also take advantage of several load management/demand response programs offered by the utility aimed at helping relieve congestion in its service territory.

  • The Distributed Load Relief Program offers participants the greater of $0.50/kWh or the difference between the real-time zonal LBMP and their retail rate for voluntary load drops of 50 kW or more during localized grid emergencies (i.e., emergencies called by Con Edison that are not system-wide across New York; see NYISO's EDRP program, above, for the latter). Customers committed to mandatory load reduction also receive monthly payments. Load reductions must be for at least four hours and are measured in comparison to average non-event day baselines. Remuneration is based on the number and length of responses, as well as a customer's willingness to participate in a mandatory "Summer Reservation Program."

  • The Steam Air-Conditioning Summer Discount Program provides steam customers located in Manhattan south of 96th Street with a $2 per 1,000 pound discount for steam used by new or replacement steam air-conditioning equipment (absorption or steam turbine) used during the high electricity demand months of May through October.

  • Con Edison's Central Air-Conditioning Program provides free Internet-controllable programmable thermostats to customers with a peak demand less than 100 kW who agree to allow Con Edison to occasionally cycle their air-conditioning compressors using an overrideable radio signal to the thermostat.

  • Customers with load-shifting capability can take advantage of Con Edison's day-ahead hourly pricing rate, under which all demand is priced at the day-ahead price. By gauging day-ahead pricing, customers can plan their load reduction strategies around high-price periods and, in turn, benefit from shifting load to lower-priced periods. To be eligible, facilities must have 15-minute interval metering, the cost of which may be offset under NYSERDA's Demand Response Performance Based Incentive (see above). Accounts with a peak load over 1,500 kW are defaulted into this rate if a competitive supply option is not chosen.

What distributed energy resource options are available to me?

The Database of State Incentives for Renewable Energy (DSIRE) provides information on programs that offer incentives for renewable distributed generation. The following programs may be of interest to Federal customers:

  • NYSERDA's Photovoltaics Incentives Program and Wind Incentives Program both offer generous incentives for eligible participants who install renewable electricity generation sources. For photovoltaics (PV), eligible projects can receive $3/watt for the first 40 kW and $2/watt for the next 40 kW on new systems (though the whole array may be larger). These incentives generally cover 40% to 45% of installed cost. For wind, incentives are based on the specific turbine installed. For both programs, installation must be done by an eligible installer identified by NYSERDA. Costs not covered by incentive payments may be eligible for the NYSERDA $mart Loan program.

  • Through the Combined Heat and Power (CHP) and Renewable Generation Technical Assistance program, NYSERDA cost-shares up to $50,000 ($100,000 in Con Edison territory) for studies that investigate the site-specific technical and economic feasibility of installing electric generation capacity fueled by renewable resources or CHP systems with efficiencies of 60% or higher.

  • LIPA offers cash incentives for installation of solar PV, wind, and geothermal heating and cooling.

Are there energy efficiency programs sponsored by the state government?

Public-purpose-funded energy efficiency programs are outlined above.

What additional opportunities are available to me?

NYSERDA maintains a comprehensive list of funding opportunities.

Federal customers whose utilities have areawide supply contracts through the General Services Administration (GSA) (e.g., Con Edison and National Grid) may be able to take advantage of third-party financed energy efficiency projects called utility energy service contracts (UESCs). Information is available through the GSA Energy Center of Expertise Library. Federal facilities should contact their account executive to determine the level of each utility's participation.

NOTE: Energy efficiency funds and demand response programs are updated at least annually. Please contact the FEMP webmaster if changes are needed between updates.