Outdoor Solid State Lighting Case Studies
LED lighting replaced aging systems in this parking structure at the Providence Portland Medical Center in Portland, Oregon.
The following case studies outline the application of outdoor solid state lighting in Federal and private industry applications.
Parking Lot and Structure Lighting
The following parking lot and structure lighting case studies are offered from DOE GATEWAY solid state lighting demonstration project reports. These demonstrations showcase high-performance LED products for general illumination in a variety of commercial and residential applications.
-
LED Parking Lot Lighting - Walmart, Leavenworth, Kansas: First new construction to use the LED Parking Lot Performance Specification developed by the DOE Better Buildings Alliance (BBA). Application included LED lighting with metal halide wall packs installed along the building façade.
-
LED Parking Lot Lighting - Raley's Supermarket, West Sacramento, California: Several metal halide luminaires were replaced with new LED luminaires incorporating bi-level operation (dim state and full state) controlled by motion detectors.
-
LED Parking Structure Lighting - Providence Portland Medical Center (PPMC): With an eye on replacing its aging stock of luminaires campus-wide, PPMC evaluated energy-efficient lighting options and replaced several high-pressure sodium fixtures in the hospital parking structure with LED luminaires.
-
LED Parking Lot Lighting - Manchester, New Hampshire: In a shopping plaza parking lot in Manchester, New Hampshire, high-pressure sodium and metal halide luminaires were replaced with LED luminaires controlled by integral occupancy sensors that vary between "high" and "low" light output settings.
-
LED Parking Lot Lighting – Walmart, Leavenworth, Kansas: Walmart used the DOE Better Buildings Alliance LED Site (Parking Lot) Specification as a basis to develop bid specification for Walmart Supercenter.
-
Parking Structure LED Lighting – Cleveland Clinic, Cleveland, Ohio: DOE Better Buildings Alliance High-Efficiency Parking Structure Lighting Specification used to prepare a request for proposals for LED lighting at Cleveland Clinic's 100th Street Garage.
Street and Roadway Lighting
The following street and roadway lighting case studies are offered from DOE GATEWAY solid state lighting demonstration project reports. These demonstrations showcase high-performance LED products for general illumination in a variety of commercial and residential applications.
-
LED Roadway Lighting - Palo Alto, California: Assessment of the energy, economic, and performance impacts of replacing high-pressure sodium street lights with LED and induction technologies.
-
LED Street Lighting – Lija Loop in Portland, Oregon: Analysis of the energy and performance impacts of replacing eight high-pressure sodium street lights on one residential street with LED luminaires.
-
LED Roadway Lighting - I-35W Bridge: Analysis of lumen depreciation, physical effects, and performance impacts over time.
-
LED Street Lighting – San Francisco, California: Study of LED street light performance from four different manufacturers installed on four public avenues to replace 100 Watt nominal high-pressure sodium luminaires.
-
LED Street Lighting – Oakland, California: Assessment of energy, economic, and safety impacts of replacing 15 high-pressure sodium street lights on two public streets with LED luminaires.