• Site Map
  • Bookmark and Share

Advanced Manufacturing Office Activities in New York

 

Mapped AMO State Activities

The following map provides a visual representation of AMO activities in New York. Click the checkboxes to filter certain activities. You may click the pushpin icon to show activity details. All locations are approximate. Following the map, there are lists that provide AMO activities (Energy Savings Assessments, Industrial Assessment Centers, Events and Trainings, and AMO Partner Projects) in New York.

Back to full map

Projects Pushpin Projects

AMO Project Award

AMO provided seed funding to 23 awardees for the development and delivery of industrial energy efficiency programs at the state and regional levels. These projects are aimed at delivering assessments, trainings, and technical resources to manufacturers to achieve significant reductions in industrial energy intensity.

R&D Projects and Successes

R and D Pushpin - Denotes Projects on map above

In order to meet the challenges of improving energy efficiency, the Advanced Manufacturing Office (AMO) helps to mitigate its industry partners' energy use. Both share the cost of research and development (R&D) projects while reaching the common goals of improving not only energy efficiency, but economic viability, energy security, environmental quality, and resource conservation. The following list provides New York's active and complete partner projects:

Project Successes Project Successes
Distributed Wireless Multisensors for Reducing Motor Energy Use, GE Global Research
Niskayuna, NY
Industry: Sensors and Automation
Status: Complete
Details PDF

Integrated Numerical Methods and Design Provisions for Aluminum Structures, Cornell University
Ithaca, NY
Industry: Aluminum
Status: Complete
Details PDF

Intelligent Extruder Software for Polymer Compounding, GE Global Research
Niskayuna, NY
Industry: Sensors and Automation
Status: Complete
Details PDF

Measurement and Control of Glass Feedstocks, Energy Research Company, Staten Island; Harris Communications, Rochester; Vesuvius-Monofrax Refractories
Falconer, NY
Industry: Glass
Status: Complete
Details PDF

Parallel Beam X-Ray Diffraction System X-Ray, Optical Systems, Inc
East Greenbush, NY
Industry: Sensors and Automation
Status: Complete
Details PDF

Total Cost Assessment Software, Center for Waste Reduction, Technologies Americal Institute of Chemical Engineers
New York, NY
Industry: Chemicals
Status: Complete
Details PDF

Innovative Vertical Floatation Melter (VFM) and Scrap Dryer, Energy Research Company
Staten Island, NY
Industry: Metal Casting
Status: Complete
Details PDF

Through-the-Earth Communications for the Mining Industry, Harris Communications
Rochester, NY
Industry: Mining
Status: Complete
Details PDF

Dilute Oxygen Combustion (DOC) System, Praxair
Tarrytown, NY
Industry: Steel
Status: Complete
Details PDF

R&D Projects
Microwave Enhanced Direct Cracking of Hydrocarbon Feedstock for Production of Ethylene and Propylene
Troy, NY
Industry: Energy Intensive Processes
Status: Active
Details PDF

Energy-Effi cient Microwave Hybrid Processing of Lime for Cement, Steel, and Glass Industries
Troy, NY
Industry: Energy Intensive Processes
Status: Active
Details PDF

New Manufacturing Method for Paper Filler and Fiber Materials
Albany, NY
Industry: Energy Intensive Processes
Status: Active
Details PDF

Nanostructured Ferritic Alloys: Improving Manufacturing Energy Efficiency and Performance for High-Temperature Applications
Niskayuna, NY
Industry: Industrial Materials for the Future
Status: Active
Details PDF
Use of Microwave for Energy-Efficient Heating in High-Temperature Brazing
Niskayuna, NY
Industry: Metal Casting
Status: Active
Details PDF

Intelligent Extruder Will Produce Compounded Material Right the First Time and Every Time
Niskayuna, NY
Industry: Aluminum
Status: Complete
Details PDF

Energy-Saving Glass Lamination via Selective Radio-Frequency Heating
Rensselaer, NY
Industry: Glass
Status: Complete
Details PDF

Integrated DC-DC Conversion for Energy-Efficient Multicore Microprocessors
New York, NY
Industry: Information Communication Technologies
Status: Active
Details PDF

Fuel Flexible Combustion Systems for High-Efficiency Utilization of Opportunity Fuels in Gas Turbines
Niskayuna, NY
Industry: CHP and Distributed Generation
Status: Active
Details PDF

Economizer Based Data Center Liquid Cooling with Advanced Metal Interfaces
Yorktown, NY
Industry: Information Communication Technology
Status: Active
Details PDF

A Measurement – Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities
Yorktown, NY
Industry: Information Communication Technologies
Status: Active
Details PDF

Development of Fuel-Flexible Combustion Systems Utilizing Opportunity Fuels in Gas Turbines, GE Global Research
Niskayuna, NY
Industry: Fuel and Feedstock Flexibility
Status: Active
Details PDF

Hierarchical Nanoceramics for Industrial Process Sensors, GE Global Research
Niskayuna, NY
Industry: Industrial Materials for the Future
Status: Active
Details PDF

Intelligent Extruder Software for Polymer Compounding, GE Global Research, Niskayuna; GE Plastics
Selkirk, NY
Industry: Sensors and Automation
Status: Complete
Details PDF

Laboratory Development of a High Capacity Gas Fired Paper Dryer, Boise Cascade Corporation, Eclipse Combustion, GL&V/Black Clawson-Kennedy, Gas Technology Institute
Hudson Falls, NY
Industry: Forest Products
Status: Complete
Details PDF

Laser-Induced Breakdown Spectroscopy, Energy Research Company (ERCo)
Staten Island, NY
Industry: Aluminum
Status: Complete
Details PDF

Molecular Analysis of Carbohydrate Regulation in Loblolly Pine, Brookhaven National Laboratory
Upton, NY
Industry: Forest Products
Status: Complete
Details PDF
New Catalyst Technology for the Selective Oxidation of Feedstock Aromatic Compounds to Commodity Chemicals, Akzo Nobel Chemicals, Inc.
Dobbs Ferry, NY
Industry: Chemicals
Status: Complete
Details PDF

Novel Ceramic Composition for Hall-Heroult Cell Anode Application, Advanced Refractory Technologies, Inc.
Buffalo, NY
Industry: Aluminum
Status: Complete
Details PDF

Understanding the Nature and Reactivity of Residual Lignin for Improved Pulping and Bleaching Efficiency, The Research Foundation of the State University of New York, College of Environmental Science and Forestry
Syracuse, NY
Industry: Forest Products
Status: Complete
Details PDF

Grain Refinement Of Permanent Mold Cast Copper-Base Alloys, Copper Development Association
New York, NY
Industry: Metal Casting
Status: Complete
Details PDF

In-Situ, Real-Time Measurement of Melt Constituents, Energy Research Company
Staten Island, NY
Industry: Mining
Status: Complete
Details PDF

Integrating Steel Production with Mineral Sequestration, Columbia University
New York, NY
Industry: Steel
Status: Complete
Details PDF

Design of Mold Surface Topography, Cornell University
Ithaca, NY
Industry: Aluminum
Status: Complete
Details PDF

Directed Green Liquor Utilization (D-GLU) Pulping, Wego Chemical & Mineral
Great Neck , NY
Industry: Forest Products
Status: Complete
Details PDF

Energy-Saving Lightweight Refractory, Silicon Carbide Products, Inc.
Horseheads, NY
Industry: Aluminum
Status: Complete
Details PDF

Assessing the Significance of Below-Ground Carbon Allocation of Fast and Slow Growing Families of Loblolly Pine, Boyce Thompson Institute for Plant Research
Ithaca, NY
Industry: Forest Products
Status: Complete
Details PDF

Large Plant Assessments (ESAs)

With emphasis on reducing natural gas consumption, DOE provides American businesses, factories, and manufacturing facilities with on-site Energy Savings Assessments (ESAs). The purpose of these assessments is to identify immediate opportunities to save energy and money that will lead to significant long-term savings. Gold and silver stars represent facilities that have been recognized for their achievements in industrial energy savings. The following is a list of businesses that have all benefited from AMO assessments in New York:

ESA Pushpin - Denotes Large Plant Assessments (ESAs) on map above

Republic Engineered Products - Lackawanna Plant
Blasdell, NY
3/13/2007
Details

General Motors - Tonawanda Engine Facility
Buffalo, NY
10/9/2007
Details

General Motors - Tonawanda Engine Facility
Buffalo, NY
7/21/2008
Details

Kraft Foods - Campbell
Campbell, NY
7/14/2008
Details

Kraft Foods - Campbell
Campbell, NY
3/21/2006
Details

Corning Incorporated - Canton Plant
Canton, NY
5/8/2006
Details

World Kitchen Inc - Pressware Plant
Corning, NY
2/12/2008
Details

Owens Corning - Delmar Plant
Feura Bush, NY
6/12/2007
Details

Owens Corning - Delmar Plant
Feura Bush, NY
10/13/2009
Details

Cellu Tissue Holdings - Natural Dam
Gouverneur, NY
6/9/2009
Details
Alcoa - Massena West
Massena, NY
6/16/2009
Details

Alcoa - Massena West
Massena, NY
12/2/2008
Details

Corning Incorporated - Erwin Diesel Facility
Painted Post, NY
8/24/2009
Details

IBM Corporation - POK
Poughkeepsie, NY
11/19/2007
Details

Eastman Kodak Company - Rochester
Rochester, NY
4/24/2006
Details

Ball Corporation - Saratoga (Saint - Gobain)
Saratoga Springs , NY
7/12/2011

SCA Tissue North America - South Glen Falls Paper Mill
South Glens Falls, NY
3/17/2009
Details

Pratt Industries - Staten Island
STATEN ISLAND, NY
3/12/2008
Details

Rynel
Syracusae, NY
8/5/2010

3M - Tonawanda
Tonawanda, NY
9/13/2010
3M - Tonawanda
Tonawanda, NY
12/4/2007
Details

American Axle & Manufacturing - Tonawanda Forge
Tonawanda, NY
9/18/2007
Details

Goodyear - Buffalo
Tonawanda, NY
1/27/2009
Details

Kraft Foods- Walton
Walton, NY
12/15/2008
Details

Momentive Performance Materials  - Waterford Plant
Waterford, NY
7/21/2009
Details

Gunlocke Company  - Wayland
Wayland, NY
12/16/2008
Details

Medium / Small Plant Assessments (IACs)

Industrial Assessment Centers (IACs) provide eligible small- and medium-sized manufacturers with no-cost, on-site energy assessments to identify potential savings opportunities. The following is a list of IAC training participants in New York for the past two years. A complete collection of all the publicly available assessment and recommendation data is available at the AMO IAC database.

IAC Assessments Pushpin - Denotes Medium / Small Plant Assessments (IACs) on map above

Advanced Motors and Drives
East Syracuse, NY
4/24/2009

AJL Manufacturing Inc.
Rochester, NY
10/1/2009

B. W. Elliott Manufacturing
Binghamton, NY
4/29/2011

Baldwin Richardson Foods
Macedon, NY
5/27/2011

Ball Co.
Saratoga Springs, NY
7/12/2011

Champion Home Builders, Inc.
Sangerfield, NY
5/20/2011

Corning Incorporated
Oneonta, NY
8/4/2011

Corning Refractory
Corning, NY
3/25/2011

Cortland Standard Printing Co.
Cortland, NY
11/11/2010

Danisco
Rochester, NY
6/18/2010

Davis-Standard, LLC
Fulton, NY
11/22/2010

Deiorio Frozen Dough
Utica, NY
2/24/2011
Dow Jones (Printing)
Bronx, NY
7/14/2011

Eaton Corporation
Horseheads, NY
12/2/2010

FCR - Ontario
Stanley, NY
2/18/2011

Freeze-Dry Foods
Albion, NY
11/5/2010

HMI Metal Powders
Clayville, NY
10/1/2010

IEC Electronics Corp.
Newark, NY
12/9/2011

Interface Solutions, Inc.
Fulton, NY
4/16/2010

Lapp Insulators LLC
Le Roy, NY
10/9/2009

Legrand (Pass & Seynour)
Syracuse, NY
8/9/2011

LiDestri Foods Inc.
Fairport, NY
2/19/2010

Nixon Gear, Inc.
Syracuse, NY
3/11/2011

Oberdorfer Foundries
Syracuse, NY
4/30/2010
Owl Wire and Cable, LLC
Canastota, NY
10/21/2011

PCI Paper Conversions, Inc.
Syracuse, NY
10/7/2009

Poland Sand & Gravel
Poland, NY
4/3/2009

Schlegel Systems, Inc.
Rochester, NY
11/11/2011

Sealed Air Corporation
Rochester, NY
4/6/2009

Therm Incorporated
Ithaca, NY
1/22/2010

Tropel Fairport
Fairport, NY
10/2/2009

TRW Automotive
Auburn, NY
10/5/2009

Welch Allyn
Skaneateles Falls, NY
3/26/2010

Events and Trainings

The Advanced Manufacturing Office (AMO) offers system-wide and component-specific training sessions and materials to help reduce energy use, save money, and minimize waste through system optimization. The following is a list of New York's past training events:

Events Pushpin - Denotes Events on map above

There are no events or trainings in this state.

View all AMO Events 

 

Back to Top

Technical Resources

AMO provides information on upcoming energy efficiency events and trainings, case studies on replicable industrial energy efficiency projects, and contact information for Industrial Assessment Centers (IAC), Manufacturing Extension Partnership (MEP) Centers, and Regional Clean Energy Application Centers.

Case Studies in New York

Each year AMO develops new case studies on research, development and demonstration projects; energy assessments; the use of AMO tools and training; and leveraging of AMO partner resources for energy efficiency project implementation. The case studies are developed jointly with AMO's industrial partners. The following is a list of the case studies in New York:

Compressed Air System Enhancement Increases Efficiency and Provides Energy Savings at a Circuit Board Manufacturer (Sanmina Corporation)
Sanmina Corporation
Owego, NY

Kodak: MotorMaster+ Software Tool Is the Foundation for Energy Efficiency at a Chemical and Imaging Technologies Plant
Kodak
Rochester, NY

Kodak: Optimizing the Pumping System Saves Energy and Reduces Demand Charges at a Chemical Plant
Kodak
Rochester, NY

Onondaga County Department of Water Environment Protection: Process Optimization Saves Energy at Metropolitan Syracuse Wastewater Treatment Plant
Metropolitan Syracuse Wastewater Treatment Plant
Syracuse, NY

Utica Corporation Plant-Wide Energy Assessment Report Final Summary
Utica Corporation
Whitesboro, NY

Industrial Assessment Centers (IACs) for Region

There are 26 Industrial Assessment Centers (IACs), sponsored by AMO, located at universities across the U.S. IACs provide no-cost energy assessments to small- and medium-sized manufacturers within a 150-mile radius. Additionally, they provide industrial assessment and energy management systems training for the next generation of energy engineers.

Syracuse University
Director: Dr. Suresh Santanam
Phone: 315-443-9863
Fax: 315-443-3219
Email: ssantana@syr.edu
Web Site: http://iac.syr.edu/

Manufacturing Extension Partnership (MEPs) in New York

The National Institute of Standards and Technology's Hollings Manufacturing Extension Partnership (MEP) is a not-for-profit network of businesses and manufacturing specialists, with almost 60 MEP centers across the nation. Funded by state, local, and private organizations, and in partnership with the IACs, they provide a variety of services to U.S. industry, including process improvements, innovation strategies, and green manufacturing techniques.

Center for Economic Growth (CEG)
President and CEO: F. Michael Tucker
Phone: (518) 465-8975
Fax: (518) 465-6681
Email: miket@ceg.org
Web Site: http://www.ceg.org

Central New York Technology Development Organization (CNYTDO)
President and CEO: Robert I. Trachtenberg
Phone: (315) 425-5144
Fax: (315) 233-1259
Email: rtrachtenberg@cnytdo.org
Web Site: http://www.cnytdo.org

High Technology of Rochester, Inc. (HTR)
President: James S. Senall
Phone: (585) 214-2401
Fax: (585) 272-0054
Email: james.senall@htr.org
Web Site: http://www.htr.org

Long Island Forum for Technology, Inc. (LIFT)
Executive Director: William Wahlig
Phone: (631) 969-3700
Fax: (631) 846-2789
Email: bwahlig@lift.org
Web Site: http://www.lift.org

Hudson Valley Technology Development Center (HVTDC)
Executive Director: Thomas G. Phillips, Sr.
Phone: (845) 896-6934, ext. 3006
Fax: (845) 896-7006
Email: tom.phillips@hvtdc.org
Web Site: http://www.hvtdc.org

Mohawk Valley Applied Technology Corporation (MVATC)
President: Paul MacEnroe
Phone: (315) 793-8050
Fax: (315) 793-8057
Email: pmac@mvatc.com
Web Site: http://www.mvatc.com/

Industrial & Technology Assistance Corporation (ITAC)
President: Sara P. Garretson
Phone: (212) 442-2990
Fax: (212) 442-4567
Email: sgarretson@itac.org
Web Site: http://www.itac.org

Council for International Trade, Technology, Education and Communication (CITEC)
Executive Director: William P. Murray, P.E.
Phone: (315) 268-3778 x29
Fax: (315) 268-4432
Email: murray@citec.org
Web Site: http://www.citec.org/index.html

Alliance for Manufacturing and Technology (AM&T)
Executive Director: Edward Gaetano
Phone: (607) 774-0022, ext. 304
Fax: (607) 774-0026
Email: info@amt-mep.org
Web Site: http://www.amt-mep.org

Insyte Consulting
President: Benjamin Rand
Phone: (716) 636-3626
Fax: (716) 845-6418
Email: brand@insyte-consulting.com
Web Site: http://www.insyte-consulting.com

New York State Office of Science, Technology and Academic Research (NYSTAR)
Executive Director: Edward Reinfurt
Phone: (518) 292-5700
Fax: (518) 292.5798
Email: ereinfurt@nystar.state.ny.us
Web Site: http://www.nystar.state.ny.us

Clean Energy Regional Application Centers

Formerly the Combined Heat and Power (CHP) Regional Application Centers (RACs), the eight Clean Energy Application Centers across the U.S. promote CHP, waste heat recovery and other clean energy technologies and practices. They provide regional assistance for specific projects, including market assessments, targeted education and outreach, and technical assistance.

Northeast Clean Energy Application Center
Co-Director for Education and Outreach: Tom Bourgeois
Phone: (914) 422-4013
Email: tbourgeois@law.pace.edu
Web Site: http://www.northeastcleanenergy.org

State Incentives and Resource Database

This database is a comprehensive collection of incentives and resources for implementing energy-efficiency measures in a commercial or industrial facility. These incentives are often financial and are in place to reward business and residential customers for making strides in energy efficiency. The resources are in the form of analysis tools, education and training programs, and energy audits. The following link will take you to a site that will show you the energy incentives and resources in New York.

State Incentive Handbooks
AMO has created handbooks of available resources and incentives for industrial energy efficiency implementation organized by system for each of the 50 states.

Resource Fact Sheets
AMO developed 50 resource fact sheets that identify local, regional, state, and utility organizations in each state that can serve as partners working together with manufacturers to advance industrial energy efficiency.

 

Back to Top

Contacts

DOE Contacts

DOE Headquarters Contact
Sandy Glatt
1617 Cole Boulevard
Golden, Colorado 80401
Phone: (720) 356-1544
Email: sandy.glatt@go.doe.gov

DOE Project Contact
Jamey Evans
1617 Cole Boulevard
Golden, CO 80401
Phone: (720) 356-1536
Email: jamey.evans@go.doe.gov

State Contact(s)

New York State Energy Research and Development Authority (NYSERDA)
Stacey Sabo
Project Manager
17 Columbia Circle
Albany, New York 12203
Phone: (716) 842-1522 x3037
Fax: (518) 862-1091
Email: sls@nyserda.org
Web Site: http://www.nyserda.org/

 

Back to Top

About New York Industry

New York has a total of 19.4 million residents and ranks 3rd in the nation in terms of GDP, which is $1034.3 billion. In 2009, New York ranked 26th in the nation’s industrial energy consumption at 366 trillion Btu and 26th in the nation’s industrial natural gas consumption at 74.8 trillion Btu.

New York’s leading industries (by total value of shipments) include Chemical Manufacturing, Food Manufacturing, and Computer and Electronic Product Manufacturing. Information on the state’s top industries is displayed in the table below, which can be sorted based on number of employees, production workers’ hours, and payroll, among other categories.

The Advanced Manufacturing Office (AMO) is providing funding for the development and delivery of industrial energy efficiency programs implemented on a local, state or regional level. These projects are delivering Save Energy Now resources to reduce industrial energy intensity in the states. AMO has 23 total active state and regional projects that are impacting 36 states across the U.S. Learn More

New York At a Glance

State Information (1)
2010 Population (Million) 19.4
2010 GDP (Billion) $1,034.3
GDP Rank 3
Energy Statistics (2) Source PDF for Energy Statistics
Total Energy Consumption 2009 (Trillion Btu) 3,818.5
Total Industrial Energy Consumption 2009 (Trillion Btu) 366.0
Total Industrial Energy Consumption Rank 26
Total Industrial GDP 2009 (Thousand) $100,389,000.0
Industrial Energy Intensity (Btu/GDP) 3,645.0
Industrial Energy Intensity Rank 49
Total Industrial Electricity Use 2009 (Trillion Btu)* 142.1
Total Industrial Electricity Use Rank 28
Total Industrial Natural Gas Use 2009 (Trillion Btu) 74.8
Total Industrial Natural Gas Use Rank 26
View state rankings
* Total industrial electricity use reflects industrial retail electricity sales and electrical system energy losses.

Total Industrial Energy Consumption Statistics in New York

Year Energy Consumption
(Trillion Btu)
National Average
(Trillion Btu)
2009 366.0 560.4
2008 420.8 613.3
2007 502.2 636.5
2006 462.3 635.0
2005 528.2 637.0
2004 534.7 656.0
2003 525.4 638.6
2002 572.0 640.6
2001 598.4 642.2
2000 712.9 678.9
You need to upgrade your Flash Player
Source: http://www.eia.doe.gov/emeu/states/sep_use/ind/use_ind_ny.html


Top Industries in New York




NAICS CodeIndustry Name Number of Employees Production Workers' Hours (1,000) Annual Payroll ($1,000) Production Workers' Wages ($1,000) Total Cost of Materials ($1,000) Total Capital Expenditures ($1,000) Value Added ($1,000) Total Value of Shipments ($1,000)
332 Fabricated Metal Product Manufacturing 51,329 73,795 $2,311,309 $1,392,519 $4,382,231 $337,396 $5,399,318 $9,883,225
311 Food Manufacturing 43,001 64,223 $1,643,404 $1,082,772 $9,300,612 $565,838 $7,738,957 $16,998,415
325 Chemical Manufacturing 42,558 47,839 $2,452,298 $1,083,678 $10,753,914 $727,912 $26,982,161 $37,881,708
333 Machinery Manufacturing 39,116 44,818 $2,191,380 $968,127 $5,738,609 $252,574 $6,073,182 $11,560,280
339 Miscellaneous Manufacturing 37,521 43,745 $1,593,576 $737,930 $3,433,750 $132,579 $4,801,704 $8,411,554
334 Computer and Electronic Product Manufacturing 55,204 42,813 $3,403,916 $1,004,748 $6,523,635 $617,867 $7,735,347 $14,203,185
326 Plastics and Rubber Products Manufacturing 21,543 32,447 $931,347 $543,908 $2,205,022 $178,398 $2,859,199 $5,097,215
323 Printing and Related Support Activities 25,062 31,675 $1,092,471 $689,291 $1,618,071 $87,055 $3,299,466 $4,943,909
336 Transportation Equipment Manufacturing 23,251 29,869 $1,316,456 $734,745 $3,799,911 $181,745 $3,487,577 $7,368,322
337 Furniture and Related Product Manufacturing 16,859 24,062 $632,048 $376,323 $1,041,059 $25,347 $1,618,602 $2,697,903
Source: http://factfinder.census.gov/servlet/IBQTable?_bm=y&-ds_name=AM0931AS101

Note: The data included in this table is from the U.S. Census Bureau's Annual Survey of Manufactures, except for years that end in "2" or "7", when data from its more comprehensive Economic Census is reported.


Additional Resources

List of Fortune 500 Companies in NY:
http://money.cnn.com/magazines/fortune/fortune500/2010/states/NY.html

American Council for an Energy-Efficient Economy's Policy Database for New York:
http://www.aceee.org/sector/state-policy/new-york