Training: Compressed Air Systems


    Learn about the diverse training sessions offered. The courses are taught by highly qualified instructors who have met rigorous standards.

    Compressed Air Systems Tools Training – 2-hour webcast

    Availability: Online webcast

    A two-hour webcastPDF on the use of the Compressed Air Challenge (CAC®) Toolkit and the AIRMaster+ software tool is available that introduces the tools and presents the basics—and the benefits—of using them to target opportunities for energy savings in your plant.

    Fundamentals of Compressed Air Systems – 1-day workshop

    Availability: Onsite instructor-led and web edition (four, two-hour, live webinars make up the web edition training)

    Find out how a compressed air system works and the benefits of optimal compressed air system performance. This initial class demonstrates how to compute the current cost of your plant's compressed air systems, how to measure and create a baseline of system performance, and how to determine the impact of different compressor control types. Learn basic approaches for cutting costs; identify steps for proper system operation, maintenance, and point-of-use accountability; and tailor a compressed air system management action plan for your plant. Learn more about Compressed Air Challenge Qualified Instructors.

    See the Compressed Air Challenge Training for further information on upcoming in-person trainings and to access the web edition.

    Advanced Management of Compressed Air Systems – 2-day workshop

    Availability: Onsite instructor-led

    Learn what data and tools are necessary to measure and assess the efficiency and cost-effectiveness of a compressed air system. This advanced course in compressed air system management teaches you to develop a system profile and address point-of-use issues, including determining actual air quality requirements, investigating and reducing highest point-of-use pressure requirements, and addressing high-volume intermittent applications. In addition, you will learn how to implement a compressed air system maintenance program, determine different compressor control strategies, align the supply-side to demand-side operation, and gain an understanding of the value of heat recovery. Participants will also gain knowledge on how to successfully present project proposals to management. Learn more about Compressed Air Challenge Qualified Instructors.

    See the Compressed Air Challenge Training for further information on upcoming in-person trainings.

    Become a Qualified AIRMaster+ Specialist – 3½-day workshop

    Availability: Onsite instructor-led

    The DOE and the Compressed Air Challenge (CAC®) offer a 3½ day training program for compressed air system specialists; participants who successfully complete a qualification workshop and exam receive the designation of Qualified Specialist in the use of the AIRMaster+ software tool. This training includes classroom instruction, a practical exam testing hands-on measurement, and a written exam.

    The DOE and CAC® recognize Qualified AIRMaster+ specialists for their ability to use the AIRMaster+ software effectively with industrial end users. Used properly, AIRMaster+ is a powerful tool for modeling "what if" scenarios for possible improvements to compressed air systems. Being a Qualified Specialist is a good way to ensure that these scenarios address the full potential of a systems approach.

    To become a Qualified AIRMaster+ Specialist, Allied Partners must have previously completed the CAC® Advanced Management of Compressed Air Systems course as a prerequisite to the AIRMaster+ training. During the AIRMaster+ course, participants will learn:

    • How to use the AIRMaster+ software
    • How to accurately acquire input data for AIRMaster+
    • How to use AIRMaster+ to evaluate compressed air systems and develop a measurement plan
    • How to make measurements for hourly trends of typical daily data vs. making dynamic measurements to characterize system events, pressure, and flow profiles
    • How to create AIRMaster+ compressor operating scenarios, accounting for the effect of system dynamics, pressure profiles, characteristics of flow vs. pressure, and compressor control operation.
    • How to use the LogTool Software

    Locate a DOE-trained Qualified Specialist in your area to help optimize industrial plant efficiency for compressed air systems.

    To learn more about the AIRMaster+ Specialist Qualification training, please contact the Training Coordinator. See the Training Calendar for upcoming sessions in your area.

    Course Instructors

    The courses are taught by highly qualified instructors who have met rigorous standards.

    Name Email Phone Location
    Bessey, Eric eric.bessey@pneulogic.com 503-718-0115 OR
    Moskowitz, Frank fmoskowitz@drawproservices.com 480-563-0107 AZ
    Taranto, Tom TomTar@aol.com 315-753-0070 NY

    More trainings