Energy Department to Provide Technical Assistance to Facilities Impacted by EPA Boiler Rule
December 21, 2012
On December 20, 2012, the U.S. Environmental Protection Agency (EPA) finalized a specific set of adjustments to Clean Air Act standards, originally finalized in March 2011, for boilers and certain solid waste incinerators. The National Emissions Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters (known as Boiler Maximum Achievable Control Technology (MACT)), sets standards to cut emissions of hazardous air pollutants, such as mercury, dioxin, and lead, from large boilers in a range of industrial facilities and institutions. DOE will offer technical assistance to affected sites currently burning coal or oil, highlighting strategies such as natural gas combined heat and power (CHP), and more efficient boilers, to cut harmful pollution and reduce operational costs.
DOE will provide site-specific technical and cost information to the major source facilities currently burning coal or oil through its regional Clean Energy Application Centers (CEACs). The CEACs will visit these facilities to discuss strategies for compliance, including CHP, as well as provide information on potential funding and financing opportunities available for CHP, controls, boilers and energy efficiency assessments. Facilities that make use of this technical assistance can potentially develop strategies to comply with the regulations while adding to their bottom line. DOE has been conducting a pilot of the technical assistance program in Ohio since March 2012 in partnership with the Public Utilities Commission of Ohio. The pilot program has engaged with a variety of industrial and energy efficiency stakeholders in the state and effectively connected affected facilities with clean energy solutions.
In accordance with the August 2012 Executive Order on Accelerating Investment in Industrial Energy Efficiency, DOE has joined EPA in an effort to help ensure that major sources burning coal and oil have information on cost-effective clean energy strategies for compliance. For more information on the DOE technical assistance program, see:
Information on financial incentives available at the local, state, utility and federal levels to assist facilities with the costs of investing in CHP, boiler tune-ups, controls and/or energy efficiency assessments is available at:
Information about the rule, including links to the regulatory dockets, technical information on how the limits were developed, and impact assessments, is available at: